Benchmark Midland Power BS7680 Manuel page 46

7.9 USING THE AUGER HEIGHT ADJUST TRIGGER
The auger height adjust trigger is used to select the position of the auger housing to
match the operating surface. Choose the right height for gravel driveways, asphalt,
hard impacted snow, or lift up all the way for speedy travel.
High - Transport / Snow-covered Gravel
Raises the auger housing so that the ground scraper leaves gravel
undisturbed while clearing snow.
Middle - Normal Snow
Adjusts the tracks to be level, for full auger housing contact with the
ground.
Low - Packed Snow
Digs the auger housing down into the ground for hard packed snow or
icy snow conditions.
TM
High
Low
42