Télécharger Imprimer la page

Benchmark Midland Power BS7680 Manuel page 36

Masquer les pouces Voir aussi pour Midland Power BS7680:

Publicité

Les langues disponibles

Les langues disponibles

5.1 STARTING THE ENGINE
5.1.1 Electric Start
1
!
5
CLOSED
9
1.
Ensure the auger control and traction control levers are disengaged.
2.
Turn the fuel shut-off valve to OPEN.
3.
Move the throttle lever to FAST.
4.
Turn the POWER key to ON.
1
!
5.
Turn the choke lever to CLOSED. Note: Leave in OPEN if engine is warm.
6.
Press the primer 2 times. Note: Do not press if engine is warm.
7.
Connect an extension cord from a wall receptacle to the electric start
module on the engine.
8.
Press and hold the START button for no more than 5 seconds then release.
If it does not start after 5 attempts consult the troubleshooting chapter.
5
9.
Disconnect the extension cord from the wall receptacle and then from the
starter box.
CLOSED
10. Allow the engine to warm up for several minutes. Gradually move the choke
lever to the OPEN position.
2
OPEN
6
10
OPEN
2
OPEN
6
TM
3
FAST
7
3
FAST
7
32
4
ON
8
4
ON
8
OPEN

Publicité

loading