Télécharger Imprimer la page

HOMCOM 824-037V70 Mode D'emploi page 3

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 7
EN
In order to prevent the risks of a fire, an electrical shock, burns
and other injuries, it is imperative to observe basic safety
measures when using electrical appliances.
FUNCTIONS
1.The principle of humidification by cooling, took cooling water from the water
tank by water pump or synchronous motor, after reaching the top, the cooling
water will flow through weted pad, then bellowed off humid cool air rounding
the weted pad by rotational wind wheel.
2.Electronics control: safe and durable, have an attractive appearance.
3.Adjustable speed: have three speed, low, medium, high
4.Wind type: nature wind, normal wind, sleeping wind
5.Humidification function: the appliance adopts ice crystal refrigeration and
humidification technology, it can cut down the temperature of air vent and
raise relative humidity, prevent it from air drying.
6.Deliver wind at wide angle: swing the blades automatically, deliver wind at
wide angle flatly. Also swing the blades transversely by your hands, choose
the wind direction up and down.
7.Remote control: Far distance control, received wide angle
8.Removable air filter and cooling pad: easy to clean, can use soft brush and
detergent.
ASSEMBLING
1.Open the package and take out the air cooler.
2.Draw out the water tank, pour clean water into the tank.
 Please pay attention to the water lever.
 Pour into the water over MIN. level but no more than MAX. Level
 To en-have the cooling effect, you can put the cold ice box into the tank.
3.Check the power, and ensure they are same as the rating label.
Attention: cut the power when you pour the water into the tank.
OPERATION
Put plug in the socket, Power indicator light reminding this product in standby
mode. Turn on "
" button, default setting is in middle speed, Turn it again,
products in standby.
1. Speed key
: Press this key, automatically starting from mid, high, low
2. Mode key "
", default setting is in normal wind. Press this key,
automatically setting from normal wind, natural wind, sleep wind
3.Swing key
: press this key, the wind direction can swing flatly, and the
swing indicator light is on. Press again to cancel the function
Swing the blades transversely by your hands, choosing the wind direction up
and down.
4. Timer key
: press this key, the timer from 0 to 8 hours, each pressing
1hour.

Publicité

loading

Ce manuel est également adapté pour:

824-037v9