McQuay A Serie Manuel D'installation page 11

NOTE
Install the front frame panel firmly to prevent cool air leakage which will cause condensation and water dripping.
Good Installation
Air intake grille installation
• Before installing the air intake grille, be sure to fix the ionizer
filter to the air filter.
• Install the air intake grille together with the air filter to the
front panel.
• The grille can be fit in any direction, when selecting direction,
the ceiling design and grille operability should be considered.
• If the unit comes with ionizer filter (optional item), make
sure to fix the ionizer filter to the air filter before installing
the air intake grille.
• Fix the ionizer filter to the air filter with the black side on top
and white side at bottom.
• Carefully clip on the ionizer filter frame.
Preliminary site survey
• A place protected from rain, direct sunlight and well-ventilated wherever practicable.
• A place capable of bearing the weight of the outdoor unit and isolating noise and vibration.
• A place where there are no obstruction of air flow into or out the unit.
• Do not put any object which may become obstacle for the air flow into or out the outdoor unit.
• The location must not be susceptible to high concentration dust, oil, salt or sulfide gas.
Outdoor unit installation
• Install the outdoor unit firmly and horizontally. Maintain a space clearance from the obstruction as shown in below for
servicing and air ventilation.
All manuals and user guides at all-guides.com
Indoor Unit
Cool
Air
Ceiling Board
Panel
INSTALLATION OF THE OUTDOOR UNIT
A B
SL series
Min. distance (mm)
Cool
Air
Air Leak
Bad Installation
C D
A B C D
300 1000 300 500
1-6
Air Leak
Ceiling Board
Panel
Frame
(Optional Item)
Ionizer Filter
(Optional Item)
Filter
(Standard)