ZANKER KOB10402XB Notice D'utilisation page 33

Back lamp
Step 1
Turn the glass cover to remove it.
Step 2
Clean the glass cover.
Step 3
Replace the lamp with a suitable 300 °C heat-resistant lamp.
Step 4
Install the glass cover.
11. TROUBLESHOOTING
WARNING!
Refer to Safety chapters.
11.1 What to do if...
In any cases not included in this table please
contact with an Authorised Service Centre.
Problem
The oven does not
heat up.
11.2 Service data
If you cannot find a solution to the problem yourself, contact your dealer or an Authorised
Service Centre.
The necessary data for the service centre is on the rating plate. The rating plate is on the front
frame of the oven cavity. Do not remove the rating plate from the oven cavity.
We recommend that you write the data here:
Model (MOD.)
Product number (PNC)
Serial number (S.N.)
12. ENERGY EFFICIENCY
12.1 Product Information and Product Information Sheet*
Supplier's name
Model identification
Energy Efficiency Index
Check if...
The fuse is blown.
Problem
The door gasket is
damaged.
The lamp does not
work.
.........................................
.........................................
.........................................
Zanker
KOB10402XB 944068059
95.1
Check if...
Do not use the oven.
Contact an Authorised
Service Centre.
The lamp is burnt out.
ENGLISH 33