Télécharger Imprimer la page

Neuton CE5.4 Mode D'emploi page 7

Publicité

Les langues disponibles

Les langues disponibles

Assembling Your NEUTON Mower
To allow you to quickly begin using your NEUTON Mower, it was shipped to you partially assembled. The assembly process is
easy and does not require any special tools, knowledge, or strength.
Assembling your NEUTON Mower takes just a few steps:
Step 1: Read the Safety & Operating Instructions before proceeding.
Step 2: Remove the Battery.
Step 3: Charge the Battery before your first use.
Step 4: Attach the Lower Handlebar.
Step 5: Attach the Upper Handlebar Assembly.
Step 6: Attach the Mulching Plug, Rear Bagger, or the Side Discharge Chute (sold separately).
Step 7: Insert the Battery after being fully charged.
Step 8: Adjust the Cutting Height.
NOTE: See Figure 18 on page 11 for a photograph of the fully assembled Mower.
Remove the Battery during assembly, cleaning, Blade replacement, or when the Mower is not in use. Removing the Battery will
prevent accidental starting, and help avoid serious personal injury.
Step 1: Read the Safety & Operating Instructions before proceeding.
The NEUTON Mower is a motorized cutting machine that uses a sharp Blade. For your safety, and for best results, it is
important to read the information in "Chapter 1: Important Safety Considerations" before you assemble or use the Mower.
To familiarize yourself with the assembly, features, and operation of your Mower, please read the remainder of this manual
before proceeding.
NOTE: Do not discard the shipping box and packaging material until you are fully satisfied with your new NEUTON Battery-Powered
Mower.
Step 2: Remove the Battery.
You can quickly and easily remove the Battery from your Mower.
1. Push the Cover Latch (Figure 2) back and open the Access Cover.
Push the Cover Latch back with one hand and open the
TIP
Cover with the other.
2.
Turn the Battery Retainer Arm until it is no longer blocking the
Battery (Figure 2).
To help keep the Mower from rolling while removing
TIP
the Battery, put one foot behind a wheel for stability.
3.
Pull the Battery straight up and remove it.
NEUTON CE5.4 Battery-Powered Mower -
All manuals and user guides at all-guides.com
Safety & Operating Instructions
Access
Cover
Figure 2
Battery Retainer Arm
Cover Latch
5

Publicité

loading