All manuals and user guides at all-guides.com
CITRUS JUICER ASSEMBLY
1. Attach the Removable Handle to the
Mixing Container. Align the bottom of the
Removable Handle with the "C" shaped
handle of the Mixing Container. Pull up and
over on the Removable Handle to snap the
Handle onto the Mixing Container (FIGURE
M). Test to make certain the Removable
Handle is snug into position on the Mixing
Container.
2. Place the Juicer Base onto the Mixing
Container. Turn the Juicer Base slightly
clockwise to lock the Juicer Base onto the
Mixing Container (FIGURE N).
USING THE CITRUS JUICER
3. Cut the citrus fruit in halves.
4. Place the fruit onto the hub of the Juicer
Base (FIGURE O).
5. Place the Juicer Top on top of the fruit.
6. Push down on the Juicer Top while
turning from side to side. This will extract
the juice from the fruit.
7. Remove the Juicer Top.
8. Discard the fruit skin.
9. Remove the Juicer Base by turning
it counter-clockwise and lift off of the
Mixing Container.
10
When filling the Mixing Container to the maximum
NOTE:
capacity, the weight of the filler might be too much for the Handle
to bear. It is always best to hold the Handle and place one hand
under the Mixing Container for support when carrying or pouring.
Mixing Container
"C" handle
Juicer Base
Hub
Juicer Top
Juicer Base
FIGURE M
Removable
Handle
FIGURE N
Juicer Base
FIGURE O