GYS 079472 Mode D'emploi page 3

Operating manual
If the name of a complete inductor includes the name of a ferrite, then it can be replaced without specifi c tools.
REPLACE THE FERRITE
1. Slide the ferrite retaining plate to change the ferrite.
2. Remove the used ferrite.
3. Replace with a new ferrite.
4. Slide the retaining plate onto the new ferrite.
1
2
3
4
To keep the ferrite and inductor in good condition, avoid stationary heating and use circular or sweeping
movements instead.
Translation of the original
instructions
Ferrite
B5
Relevant inductor
10R/B5
Replacement of ferrites
3