Publicité
Les langues disponibles
Les langues disponibles
4. If the convector block is made of magnetic material, the temperature sensor (C) can be easily
positioned on it with its magnets. The temperature sensor can also be clamped between two plates
of the convector block to ensure good heat transfer. The sensor can be attached to a copper pipe
or any other non-magnetic location using the provided Velcro.
5.5 For other radiators
1. Make the feet is vertical to the radiator fan. Put the radiator fan directly under the radiator. Make
sure the fans face upwards.
2. Follow the steps of 5.2.1 steps 3-7 to make the ventilator working.
Publicité
