Publicité
Les langues disponibles
Les langues disponibles
5.3 Connector the radiator ventilator to a single sided radiator
1. Adjust all the adjustable magnets to the same side of the Radiator Ventilator (A), and make sure
the magnets are at the edge.
2.
Repeat step 1 – 7 as for the wide radiator.
5.4 Connect the radiator ventilator to a convector
1. Attach the feet by pushing them into the slots of the Radiator Ventilator (A).
2. Make sure that the Radiator Ventilator (A) faces upwards.
3. Place the Radiator Ventilator (A) on top of the convector and allow space between the convector
sides and the Radiator Ventilator (A) to reduce noise. The Radiator Ventilator can also be placed on
the ground below the convector if space allows.
AIRFLOW
DIRECTION
Publicité
