Logitech QuickCam Pro 4000 Mode D'emploi page 4

1 1
Camera Features
Snap button
Microphone
Lens
2 2
Set Up the Camera
1. Install the software first and follow
the on-screen instructions.
2. During software installation,
you are prompted to connect
the camera USB cable to
the USB port:
• Mount camera on base.
• Or mount camera on flat
panel clip.
Privacy shade
Ready light
Focus ring
Flat panel clip
Base
2
1
To mount the camera, match up the tab on the flat panel clip/base (1)
with the slot in the camera (2) before attaching the camera to the base.
1
English