Publicité
Les langues disponibles
Les langues disponibles
IAMS 0001 / 0011 / 0010
• Input for RTD, TC, Ohm, potentiometer, mA and V
• 2-wire supply > 16 V
• FM-approved for installation in Div. 2
• Output for current, voltage and 2 relays
• Universal AC or DC supply
Advanced features:
• Programmable via detachable display front (PRMMOD00), process calibra-
tion, signal and relay simulation, password protection, error diagnostics and
selection of help text in several languages.
Application:
• Linearised, electronic temperature measurement with RTD or TC sensor.
• Conversion of linear resistance variation to a standard analogue current / volt-
age signal, i.e. from solenoids and butterfly valves or linear movements with
attached potentio meter.
• Power supply and signal isolator for 2-wire transmitters.
• Process control with 2 pairs of potential-free relay contacts and analogue
output.
• Galvanic separation of analogue signals and measurement of floating signals.
• The IAMS0001 and IAMS0011 have been designed according to strict safety
requirements and are thus suit able for application in SIL 2 installations.
Technical characteristics:
• When the devices are used in combination with the PRMMOD00 display /
programming front, all operational parameters can be modified to suit any
application. As the devices are designed with electronic hardware switches, it
is not necessary to open them for setting of DIP-switches.
• A green / red front LED indicates normal operation and malfunction. A yellow
LED is ON for each active output relay.
• Continuous check of vital stored data for safety reasons.
• 4-port 2.3 kVAC galvanic isolation.
6
6
All manuals and user guides at all-guides.com
PGMMOD00 DISPLAY / PROGRAMMING FRONT
Functionality:
The simple and easily understandable menu structure
and the explanatory help texts guide you effortless ly and
automatically through the setup steps, thus making the
product very easy to use. Functions and setup options are
described in the section "Setup / operating the function
keys".
Application:
• Communications interface for modification of operational parameters in the
IAMS devices.
• Can be moved from one device to another of the same type and download
the setup of the first device to subsequent devices.
• Fixed display for readout of process data and status.
Technical characteristics:
• LCD display with 4 lines; Line 1 (H=.2 inch/5.57 mm) shows input signal,
line 2 (H=.2 inch/3.33 mm) shows units, line 3 (H=.13 inch/3.33 mm) shows
analogue output or tag no. and line 4 shows communication and relay status.
• Programming access can be blocked by assigning a password. The password
is saved in the device in order to ensure a high degree of protection against
unauthorised modifications to the setup.
Mounting / installation:
• Click PGMMOD00 onto the front of the device.
7
7
Publicité
