Publicité
Les langues disponibles
Les langues disponibles
BLOCK DIAGRAM
16
16
All manuals and user guides at all-guides.com
2-wire transmitter
Current
Voltage
Potentiometer
Safety
SETUP /
OPERATING THE FUNCTION KEYS
Documentation for routing diagram.
In general:
When setting up the IAMS devices, you will be guided through all parameters
and you can choose the settings which fit the application. For each menu
there is a scrolling help text which is automatically shown in line 3 on the
display.
Setup is carried out by use of the 3 function keys:
will increase the numerical value or choose the next parameter
will decrease the numerical value or choose the previous parameter
will save the chosen value and proceed to the next menu
When setup is completed, the display will return to the default state 1.0.
Pressing and holding
will return to the previous menu or return to the default
state (1.0) without saving the changed values or parameters.
If no key is activated for 1 minute, the display will return to the default state
(1.0) without saving the changed values or parameters.
Further explanations:
Fast setpoint adjustment and relay test: These menus allow you to make a
quick setpoint change and relay test when the FastSet menu is activated.
This function can only be activated when the relays are set for setpoint
function and are controlled by a setpoint.
Pressing
and
simultaneously will activate a relay test and change the
state of the relay.
Pressing
will save the setpoint change.
Holding down
for more than 1 second will return the unit to the default state
without saving the setpoint change.
Password protection: Programming access can be blocked by assigning a
password. The password is saved in the device in order to ensure a high
degree of protection against unauthorised modifications to the setup. Default
password 2008 allows access to all setup modules.
17
17
Publicité
