TM
Scout
SJX Balances
Step-2
Install the Pan
For SJX/E:
Rectangular pan: Place diagonally on
sub-platform and rotate counter-
clockwise until it locks.
Round pan: Set straight down on
subplatform.
For SJX: Install the stainless steel pan
directly on the subplatform.
Step-3
Connect Power
Connect the AC Adapter to the balance
input jack.
Battery Installation
Install the Four "AA" (LR6) batteries
(not included) with polarity as shown in
the battery compartment.
Step-4
Level the balance
Level the balance before using by
adjusting the feet until the air bubble is
centered
SAFETY PRECAUTIONS
CAUTION: Read all safety warnings before installing, making connections, or
servicing this equipment. Failure to comply with these warnings could result in
personal injury and/or property damage. Retain all instructions for future reference.
Verify that the local AC power supply voltage is within the input voltage
range printed on the AC adapter's ratings label.
Only connect the AC adapter to a compatible grounded socket.
Position the instrument such that the AC adapter can be easily
disconnected from the socket.
Position the power cord so that it does not pose a potential obstacle or
tripping hazard.
Operate the equipment only under ambient conditions specified in the user
instructions.
Do not operate the equipment in hazardous or explosive environments.
Disconnect the equipment from mains power before cleaning or servicing.
Service should only be performed by authorized personnel.
TM
Scout
SJX Balances
All manuals and user guides at all-guides.com
ii
Quick Start Guide
AC Adapter Jack
.
Corporation www
ohaus.com
For SJX/E
Battery
Compartment