LG KU380 Mode D'emploi page 318

Settings
]
Memo name: Input the Memo
database name for server access.
]
Sync type: Select the
synchronization type below.
- Normal
The phone and the server are
required to exchange information
about the modified data.
- Backup
The phone sends all the data from
a database to the server. The server
is expected to replace all data in
the target database with the data
sent by the phone. This means the
phone overwrites all the data in the
server database.
- Restore
The server sends all its data from a
database to the phone. The phone
is expected to replace all data in
the target database with the server
sent by the server. This means the
server overwrites all data in the
phone database.
]
Access point: Select an access point
to use for the data connection.
94
All manuals and user guides at all-guides.com
]
Sync mode: Select the
synchronization mode below.
- Manual
The synchronisation will only occur
when explicitly initiated by the user.
- Automatic
The application will automatically
initiate a sync, based on the
preferences defined (either a
regular reminder or after changes
have been made.)
- Sync frequency
Select the automaic sync
preference when you choose
automatic sync mode.
USB connection mode
You can activate USB connecton mode
of your phone for serveral usages.
If you use Mass storage function like
USB memory card, select Mass storage
in this menu. Mass storage is available
for only external memory card.
If you use Data service such as PC suite
application, select Data service in this
menu.
(Menu #.7.3)