Kohler K-527 Guide De Propriétaire page 25

Troubleshooting (cont.)
Troubleshooting Table
Symptoms Probable Cause
9. Water leaking A. Connections are
from the valve.
CAUTION: Risk
of personal injury
or product
B. Seals are worn or
damage. Turn off
the main power
and water supply.
C. Internal leak.
10. Hot water only, A. Hot and cold lines
the valve shuts
down.
Error Code Diagnosis
Error Error
Code Description
3 Outlet
temperature is
too high or
control
thermistor fault.
Kohler Co.
All manuals and user guides at all-guides.com
Recommended Action
A. Check all
not secure. connections. Make
adjustments as
needed.
B. Order a seal service
damaged. pack and replace all
seals.
C. Unit requires
overhaul. Contact
your Kohler Co.
Authorized Service
Representative.
A. Switch hot and cold
are reversed. water supply
connections. Verify
the hot water supply
is connected to the
"Hot" inlet and the
cold water supply is
connected to the
"Cold" inlet.
Possible Cause Corrective Action
A. The inlet/outlet A. Check the valve
fittings may be
blocked.
B. Cold water B. Reinstate the
supply failure.
25
outlets for
blockage or
debris. Clean the
inlet screens.
Refer to the
"Clean the Inlet
Screens" section
in the Valve
Homeowners
Guide.
cold water
supply.
1214635-5-A