Publicité
Les langues disponibles
Les langues disponibles
INFORMATION!
Should a power failure occur while the function is activated then the function will be activated
again when the power is restored.
Open door alarm
An alarm signal sounds when the door is open for too long.
Switching off the alarm:
1. Close the door.
•
The alarm will stop sounding.
INFORMATION!
If you only switch off the alarm by touching the A key, the alarm will switch on again after some
time because the door is still open.
High temperature alarm
A signal will sound when the temperature in the appliance is too high. Furthermore, symbol D shown
in the display will flash. A high temperature can be caused for several reasons:
•
The door has been opened for too long or too frequently.
•
The door does not seal properly.
•
Too much fresh food has been put in at the same time.
WARNING!
Every time the appliance is switched on again, it takes a while until the correct temperature is
reached. For this reason, the alarm is disabled for the first 24 hours after the appliance is switched
on to prevent the unnecessary activation of the alarm.
INFORMATION!
When you press the A key for the first time, the alarm will be acknowledged and turned off. When
you press the A key again, it will already work as a settings adjustment key.
Switching off the alarm:
1. Touch the A key to stop the alarm.
•
The alarm will stop sounding.
•
Symbol D shown in the display continues to flash while the
temperature is still too high.
Operating the appliance
17
Publicité
