IFM Electronic AN002 Notice D'utilisation page 30

6 Electrical connection
6.1 Connection accessories
The unit is supplied including connectors�
You can find more information about the available accessories at:
www�autosen�com
Terminal connection
Power
AC or
21 22 23 24
L L N N
5
Sensor
supply
7
In
6 Input 1 (pnp)
8 Input 2 (pnp)
6.2 Terminal connection
WARNING
Only the supplied or technically identical connectors may be used on the
terminals blocks for the AC supply (21...24) and the relay output (17...20) (→ 9
Technical data)�
To ensure protection rating IP 20 for the housing and the terminals, fully tighten
the screws of the unused connector contacts�
WARNING
Do not use unconnected terminals which are not shown in the drawing such as
terminal 20 as support point terminal�
30
DC
1 2 3 4
13
15
14
Out
19
18
17
01 02 03 04
05 06 07 08
17 18 19 20
13 14 15 16
21 22 23 24