Publicité
Les langues disponibles
Les langues disponibles
3. Operation
• Insert the parking device (G4) on the lower
extension tube until it locks into place in the
aperture (G2) (see Figure 4).
Figure 4: Attaching the parking devices
• To detach the accessory parts, press the
unlocking button (C3 or G3), and pull the items
apart (see Figure 5).
Figure 5: Detaching the accessory parts
Hot water may drip out of the accessory parts while
you are detaching them! Never detach the
accessory parts while steam is being emitted –
dangerof scalds!
• To increase the cleaning performance when
working with the detail nozzle (D1), you may
use it with the extension (D2), the round brush
(D3), or the power nozzle (D4) (see Figure 6).
Line up both grooves of the attachment with
the pins of the detail nozzle. Turn the
attachment clockwise until it locks into place.
Figure 6: Attachments for the detail nozzle
• To detach the attachment from the detail
nozzle, turn it counter-clockwise, and then pull
the components apart.
Hot water may drip out of the accessory parts
while you are detaching them! Never detach the
accessory parts while steam is being emitted –
danger of scalds!
SC 1702
Filling the Boiler with Water
• Unscrew the safety lock (A3) of the appliance.
• Pour any water out of the boiler.
Do not fill any detergents or other additives
Do not fill any detergents or other additives
Do not fill any detergents or other additives
Do not fill any detergents or other additives
Do not fill any detergents or other additives
into the boiler!
into the boiler!
into the boiler!
into the boiler!
into the boiler!
• Fill a maximum of 2 litres of tap water into the
boiler.
The boiler can be filled up to 2 cm below the
edge of the filler neck.
You can cut down the heating-up time by using
warm water.
• Screw the safety lock (A3) back onto the
appliance.
Turning on the Appliance
• Uncoil the power cord (A7) completely from
the power cord holder.
If the appliance is in operation, the power cord
must always be uncoiled completely. If the
appliance is turned off by the excess tempera-
ture protection, let the appliance cool down
before turning it on again.
• Connect the mains plug to a wall socket.
Do not turn on the appliance if there is no water
in the boiler. Otherwise, the appliance may
overheat. For reasons of safety, the appliance
automatically turns off the heating and the red
low-water indicator lamp (B6) lights up. Turn the
appliance off and fill the boiler with water to ensure
it is ready to work again (see "Refilling Water").
• Turn the appliance on using the switch (A5).
The heating indicator lamp (B4) must light up.
The full heating performance is only available if
the modular accessory plug (C7) is connected to
the appliance during the heating-up period.
• Wait until the indicator lamp (B5) lights up.
Now, the steam cleaner is ready to work.
• Please make sure that the lock (C4) on the
steam gun has been released.
If you push the lock (C4) backwards, the steam
switch (C5) cannot be actuated (child-proof lock).
If you push the lock forwards, the steam switch
can be actuated.
English – 19
Publicité
