Publicité
Les langues disponibles
Les langues disponibles
Operation
All functions of the TidalWave VSC can be operated via the buttons on the control panel.
Once set up on the control panel, all functions except setting automatic start and stop
times can be accessed on the wireless remote or the TWVSC mobile application. Note: The
remote control requires 2 AAA batteries (not included).
To turn the pump on, press the power
button. The word ON and the flow level will be
displayed on the screen of the control panel.
Use the up
and down
buttons to control the flow. Each time the flow is adjusted, the level will be displayed for
three seconds and then will return to the main "time of day" display.
power button. The word OFF and a 00 flow level will
To turn the pump off press the
be displayed.
The VSC will retain the flow setting when powered off. When power
is restored, the VSC will start the pump at full power for three seconds and then return to
the previous setting.
Programming the VSC
The TidalWave VSC is equipped
with a time of day clock and an START/
STOP timer feature. The clock and timer
do not need to be programmed to
operate the VSC. Programming the clock
and timer must be performed via the
V A R I A B L E S P E E D C O N T R O L L E R
buttons and display located on the VSC
control box. After ten seconds of inactivity
SET
during any part of the programming
sequence the selection will be entered
and the VSC will exit the program
functions and return to the main
clock display.
Setting the Clock
SET
Press and hold the set
button for three seconds to enter the program functions. The
hour will begin to blink.
Use the up
and down
buttons to select the hour.
After you have selected the hour, press the
set button and the minutes will begin to
SET
blink.
Use the up
and down
buttons to select the minutes.
Setting the Timer
When you are satisfied with the Clock setting, press the
set button and you will
SET
enter the timer features. A small ON will be displayed on the left of the screen and a large
OFF will be flashing in the center of the screen.
This indicates that the START
timer is currently turned OFF.
4
Publicité
