D-Link DFE-1005D Guide D'installation Rapide page 3

Les langues disponibles

All manuals and user guides at all-guides.com

The LED indicators for PC connection are dependent on the LAN card capabilities.

If the LED indicators do not light after making a proper connection, check the PC

LAN card, the cable, the Switch conditions and connections.

Hub to DES

Hub

to DES- - - - 1005D

Hub

to DES

A hub (10 or 100BASE-TX) can be connected to the Switch via a two-pair Category

3, 4, or 5 UTP/STP straight cable. For 100Mbps operation a Category 5 cable

must be used. The connection is accomplished from any port of the hub to any

port of the Switch.

DES- - - - 1005D to switch

DES

1005D to switch

The Switch can be connected to another switch or other devices (routers, bridges,

etc.) via a two-pair Category 3, 4, 5 UTP/STP straight or crossover cable. A Cate-

gory 5 cable must be used for 100Mbps operation. The connection can be done

from any (MDI-X) port of the Switch (Switch A) to any of the 10Mbps, 100Mbps

(MDI-X) port of the other switch (switch B) or other devices.

Additional Information

If you are encountering problems setting up your network, please refer to the User's

Guide that came with the switch. It contains many more rules, charts, explanations

and examples to help you get your network up and running.

Additional help is available online at

http://www.dlink.co.uk

in the United Kingdom, or through our offices listed at the

back of the User's Guide.

1005D

http://www.dlink.com

in the United States, at