Publicité
Les langues disponibles
Les langues disponibles
Cleaningtheshaverwithouttheself-cleaningrecharger
1. Disconnect the cord from the shaver.
2. Apply some hand soap and some water to the system outer foil.
3. Turn the shaver on.
4. Turn off the shaver after 10 to 20 seconds.
5. Remove the outer foil section.
6. Clean the shaver, the outer foil section,
the trimmer, and the comb attachment
with running water.
7. Wipe off any drops of water with a dry cloth.
8. Dry the outer foil section, the shaver,
the trimmer, and the comb attachment
completely.
9. Attach the outer foil section to the shaver.
10. Lubricate the shaver.
All manuals and user guides at all-guides.com
Lubrication
To maintain shaving comfort for a long time, it is recommended
that the oil provided with the shaver is used.
1. Switch off the shaver.
2. Apply one drop of oil to each
3. Raise the trimmer and apply one
4. Switch the shaver on, and run it for
5. Switch off the shaver, and wipe off any excess oil from the
Replacingthesystemouterfoilandtheinnerblades
system outer foil
inner blades
►Removingtheouterfoilsection
Press the foil frame release buttons and lift the
outer foil section upwards.
►Attachingtheouterfoilsection
Securely attach the outer foil section to the shaver
until it clicks.
system outer foil.
drop of oil.
approximately five seconds.
system outer foil with a soft cloth.
once every year
once every two years
17
Publicité
