Publicité
Les langues disponibles
Les langues disponibles
ASSEMBLY INSTRUCTIONS
ASSEMBLY INSTRUCTIONS
9
G
Attach a garden hose to QC garden hose adapter (G).
Note: Flush out garden hose before connecting
to QC garden hose adapter.
OPERATING INSTRUCTIONS
All manuals and user guides at all-guides.com
Push the QC garden hose adapter (G) onto the clear
quick connect (F). It will "click" into place. Do not pull
the blue sleeve back while pushing QC garden hose
adapter (G) onto clear quick connect (F). The water is
now connected to your power washer.
Note: To remove water hose, pull back on blue collar
and it will slide off the clear quick connect. This can be
done at any time. Water will not come out of the garden
hose as the blue/black collar has a water stop check
valve. Water will only flow from the garden hose when it
is connected to the clear quick connect.
You have now completed the assembly and are ready
to begin using your electric power washer. Read and
observe all safety instructions.
• Turn on water supply at the faucet to completely
• Make sure the "ON/OFF" switch is in the "OFF"
• Unwind the power cord completely and plug the GFCI
• Release safety push trigger lock up and back into
10
F
open.
position. The power switch has international symbols
for 'on' and 'off': On (|) Off (O).
into a grounded 120 volt outlet.
trigger. While pointing the spray gun in a safe
direction, squeeze the trigger on the spray gun until
there is a steady stream of water, letting the water
and air out of the hose. Push trigger lock back down
to lock back into place.
G
9
Publicité
