HAMPTON BAY AG524-ORB Guide D'utilisation Et D'entretien page 13

Assembly — Hanging the Fan (continued)
8a
Standard ceiling mounting
WARNING: Make sure the tab on the mounting bracket (A)
properly sits in the groove in the hanger ball (E) before
attaching the canopy (C) to the mounting bracket (A) by
turning the canopy housing until it drops into place.
WARNING: The locking slots of the canopy (C) are provided
only as an aid to mounting. Do not leave the fan assembly
unattended until all four canopy screws are engaged and
firmly tightened.
Slide the canopy (C) up to the ceiling. Make sure you
have placed the wires safely into the outlet box.
Secure the canopy (C) to the mounting bracket (A)
with the four screws and lock washers (FF) included
with your fan. Raise up the canopy ring (B), and line
up the four tabs with the four grooves on the canopy
(C).
Once lined up, slide the canopy ring (B), and secure it
to the canopy (C) until snug.
FF
B
All manuals and user guides at all-guides.com
8b
FF
A
C
13
Close-to-ceiling mounting
WARNING: Locking slots of the canopy (C) are provided
only as an aid to mounting. Do not leave the fan assembly
unattended until all four canopy screws are engaged and
firmly tightened.
Remove the fan from the hook on the mounting
bracket (A).
Secure the canopy (C) to the mounting bracket (A)
with the four screws with lock washers (FF). Raise up
the canopy ring (B) and line up the four tabs with the
four grooves on the canopy (C).
Once lined up, slide the canopy ring (B) and secure it
to the canopy (C) until snug.
FF
B
Please contact 1-877-527-0313 for further assistance.
FF
A
C
HAMPTONBAY.COM