Bushnell TROPHY CAM HD 119437 Mode D'emploi page 25

Parameter
Coordinate
Input
Video Sound
(only affects
video clips)
Default Set
Settings
(Bold=default)
Off, On
See "Using the
Setup Menu
Input Screens"
On, Off
Cancel,
Execute
Description
Allows the user to input latitude
and longitude coordinates for the
camera's location. This data will
be embedded in the files saved on
the camera's SD card (if "On" is
selected). This makes it possible
to see each camera's location as a
"pushpin" on Google Earth maps
when reviewing a folder full of pho-
tos from multiple cameras, or use
other "geotag" capable software
(Picassa, etc).
Select "On" to record audio along
with the video when the camera is
set to video mode (saved file sizes
will be slightly larger).
Select "Execute" and press OK
to restore all parameters to the
original factory default settings.
If the camera is behaving oddly
and you think you may have
changed the setting for something
accidently (but aren't sure which
one), this will reset all parameters
to their most commonly used or
"generic" settings.
25