HOMCOM 820-298V90 Mode D'emploi page 4

INTENDED USE:
This product is intended for indoor residential and office use only, not for industrial
or
other commercial application. Use only with electrical wiring that is in good working
order and that meets applicable codes and ordinances. This heater must be
plugged into
a 220-240V AC circuit. Do not pug anything additional into the same circuit. If you
have
any questions whether your wiring is adequate, consult a qualified electrician. Risk
of fire
,overheating, malfunction, property damage, injury or even death result if not
adhered to
Use your heater-fan only with a working smoke detector located in the vicinity of
your heater/fan.
While using your heater/fan, you should follow the IMPORTANT INSTRUCTIONS
listed below. As part of those instructions, we have used the word "WARNING" to
indicate the level of hazard: WARNING indicates a hazard which, if not avoided,
could result in injury or death.
IMPORTANT INSTRUCTIONS
When using electrical appliances, basic precautions should always be followed to
reduce the risk of fire, electric shock and injury to persons, including the following:
Read all the instructions before using this heater/fan.
This heater/fan is hot when in use. To avoid burns, do not let bare skin touch hot
surfaces. Use provided handle when moving this heater. Keep combustible
materials, such as furniture, pillows, bedding, papers, clothes and curtains at least
o.9 meters from the front of the heater-fan and keep them away from the sides and
rear.
Do not use heater unattended. Use of extreme caution is necessary when any
heater is used by or near children, invalids, disabled persons or pets.
Do not operate the heater with a damaged power cord or after the heater
malfunctions, has been dropped or damaged in any manner. Return heater to
authorized service facility for examination, electrical or mechanical adjustment or
repair.
3