HOMCOM 820-298V90 Mode D'emploi page 2

operation chart
Function Introduction
1. Plug in the power, turn on the power switch, the display screen shows the
ambient temperature, the product standby.
2. ON/OFF button: press " " for the first time, the product will be powered on
and the air supply indicator will light up. Press " " again in the unheated state.
Directly to turn it off. In the reheating state, Press " ",product will continue to
supply air for 30 seconds after shutdown.
3. Heating: After pressing the "ON/OFF" once, press the " " for the first time,
and the indicator light will show " ".now is Low Heating.Press " " twice and
the indicator light show" ",now is High Heating.Press " " third
time,Heating function off.
Temp：Temp：Press "+++", For the temperature button: in any working condition,
when you first press the temperature button, the display shows the temperature
indicator light, and the default temperature in the display is 25℃. Then press the
temperature button again, the display will show 26-27-28---40-15-16-17-18----℃.
After pressing the temperature button, if you don't press the button when the
temperature number flashes for 3 seconds, the final temperature in the display is
your set temperature. After setting the temperature, the temperature indicator light
is steady on in the display, and the display shows the ambient temperature. After
pressing the temperature button, if you press "+" or "-" within 3 seconds, the display
will shows "26-27-28-29-----" or "24-23-22-21-----". If don't press the button within 3
seconds, the final temperature in the display is your set temperature. In any
working condition, it is invalid only pressing "+" or "-" .Under the working
environment of temperature setting, press the"+ " to cancel the temperature
setting, the product stops heating, and there is only air supply function. If the set
temperature is 2℃ or 3℃ higher than the ambient temperature, Product is low
heating " ".If the set temperature is 4℃ higher than the ambient temperature,
Product is high heating " ".If the displayed setting temperature is only 1℃
higher than the ambient temperature or the same as or lower than the ambient
temperature, the product will immediately only work by air supply.
1