Publicité
15
ERROR CODE
FR
Dis-
Description
play
The left steer-
ing control lev-
er fails.
The right
steering con-
trol lever fails.
The machine
does not work
when the ma-
chine is pow-
ered on.
Français
The potentiometer on the left
steering control lever fails.
The potentiometer connector
on the left steering control lever
is loose.
The potentiometer on the right
steering control lever fails.
The potentiometer connector
on the right steering control lev-
er is loose.
Before the machine is powered
on, the PTO switch is ON.
Before the machine is powered
on, the left steering control lev-
er is ON.
Before the machine is powered
on, the right steering control
lever is ON.
After the whole machine is
powered on, the output signal
of the left or right accelerator is
abnormal.
The PTO switch is on when the
machine is powered on, but the
operator is not in the seat.
The left steering control lever is
not in the Neutral postion when
the machine is powered on, but
the operator is not in the seat.
The right steering control lever
is not in the Neutral postion
when the machine is powered
on, but the operator is not in the
seat.
The operator leaves the seat
during operation.
The operator is in the seat, and
the machine is powered on,
one steering control lever is in
the Neutral position but the oth-
er is not.
Error code on
Cause
LCD
V17
The potentiometer fails. Contact a
The connector is loose.
V18
The potentiometer fails. Contact a
The connector is loose.
V15
Before the machine is
powered on, the PTO
switch, left steering
control lever, and right
steering control lever
are not in the initial po-
sition.
V16
The operation is not
correct.
60
Solution
specified serv-
ice center.
specified serv-
ice center.
Turn off the
PTO switch.
Turn off the left
steer control
lever.
Turn off the
right steer con-
trol lever.
Contact a
specified serv-
ice center.
Push down the
PTO switch.
Make sure the
left steering
control lever is
in the N posi-
tion.
Make sure the
right steering
control lever is
in the N posi-
tion.
Do not leave
the seat. (ex-
cept emergent
conditions.)
Return the
steering con-
trol levers to
the N position
when the oper-
ator leaves the
seat.
Publicité
