pressing the button again ("SHF" indication will disappear from the
display panel) or by activating the Repeat Play
bt
functions.
b t
TRACK SCAN (SCAN)
During disc play, press and hold this button for 0.5 seconds to play
the first 10 seconds of each track on the disc (the track number on
the display panel will flash during Track Scan operation). When a
desired track is reached, press the Scan button again to cancel the
function and play of the selected track will continue. Track Scan
mode will also be canceled by activating the Repeat Play
bo
bs
Select
, or Shuffle Play
b u
DISC EJECT (
)
Disc play is stopped, the disc is ejected, and the unit will change
to radio operation by pressing this button. Discs may be ejected
with the ignition switch on or off.
cl
FRONT PANEL RELEASE BUTTON (REL)
This button is used to release the mechanism that holds the front
panel to the chassis. To detach the front panel, press the button
so that the right side of the panel is released. Grasp the released
side and pull it off of the chassis. To re-attach the panel, position
the left side of the panel in place first and then press the right side
of the panel until the mechanism locks it into place.
All manuals and user guides at all-guides.com
br
or Track Scan
br
functions.
NOTES ON USE OF FRONT PANEL
1. Make sure the front panel is right-side-up when attaching it to the
chassis as it cannot be attached when up-side down.
2. Do not press very hard on the front panel when attaching it to the
chassis. No more than light to moderate pressure should be
needed.
3. When attaching the front panel, make sure the left side is
correctly engaged before pressing the right side to lock it into
position.
, Track
4. When taking the front panel with you, please use the supplied
carrying case to protect the panel from dirt and damage. Make
sure there is no dust or dirt on the electrical terminals on the back
of the panel as this could cause intermittent operation or other
malfunctions.
-6-
128-5090A
sht. 7 of 32