Publicité
Les langues disponibles
Les langues disponibles
OPERATING INSTRUCTIONS
1
ON-OFF POWER BUTTON
VOLUME LEVEL MEMORY
Press this button momentarily to turn the unit on or off. The unit
will also turn on automatically when a compact disc is inserted if
the ignition switch is "on".
This button is also used to set the memory for the volume level
which will be recalled when the unit is turned on. To set the volume
memory, turn the unit on and adjust the volume using the Volume
2
Control
to the level which you wish to be recalled when the unit
is turned on. Then, press the On-Off button and hold it for
approximately 2 seconds. The unit will turn off and the selected
volume level is now set in the memory. If the unit is turned off with
the volume higher than the memory setting, the unit will return to
the memory setting when turned back on. If, however, the unit is
All manuals and user guides at all-guides.com
HIGH POWER 30W x 4
-1-
turned off with the volume lower than the memory setting, the unit
will return to the lower setting when turned back on.
2
VOLUME LEVEL CONTROL
To increase the volume level, press the "VOL +" button. The volume
will increase and the level will be shown on the display panel from
a minimum of 0 to a maximum of 80. To increase the volume
quickly, keep the button pressed. To decrease the volume level,
press the "VOL -" button. Keep the button pressed to decrease the
volume quickly. The display will automatically return to the normal
indication 5 seconds after the last volume adjustment or when
another function is activated. These buttons are also used in
conjunction with the Select button
balance, and fader levels as described in
3
to adjust the bass, treble,
4
5
6
7
,
,
and
.
Publicité
