Publicité
Les langues disponibles
Les langues disponibles
Figure 1
Hosetail Ready For ¾" Tubing
Hosetail Ready For 1 ¼" Tubing
Figure
Installation of Stainless Steel Hose Clamp
4) Installation Instructions (cont...)
4.3 Turn on the pump
• Plug pump into GFI protected outlet.
• Allow system to run for at least one hour. Double check all fittings and filter for leaks. If
a leak has developed at a fitting, retighten the hose clamp. Because plumbing leaks will
cause your pond to lose water, continue to monitor all fittings and filter periodically to
ensure that new leaks do not develop.
• For proper pond circulation and filtration, pump and filter (if using) should operate 24
hours a day. Continuous filtration of the water is required to maintain clear water
6
All manuals and user guides at all-guides.com
CUT HERE
Hosetail Ready For 1" Tubing
Hosetail Ready For 1 ½" Tubing
Stainless Steel Hose Clamp
Kink-Free
Tubing
CUT HERE
CUT HERE
Publicité
