TAPE OPERATION
1. Select "TAPE" mode by pressing repeatedly the [FUNCTION] button (4);
2. Insert a cassette TAPE into the [CASETTE MECHANISM] (22);
3. The system will start playback automatically;
Press [TAPE FORWARD/EJECT] button (21) half way during playback to start ra-
•
pid tape winding in forward direction.
Slightly press the [TAPE FORWARD/EJECT] button (21) again to resume
•
playback.
Press the [TAPE FORWARD/EJECT] button (21) completely inwards and the cas-
•
sette tape will be ejected.
BLUETOOTH OPERATION
1. Select "BT" mode by pressing repeatedly the [FUNCTION] button (4);
2. Connect your Bluetooth portable device to the ID Bluetooth tagged as "HIF-
1993D+BT";
3. You can now transfer the music to the HIF-1993D+BT.
Note:
Music control (play, pause, etc) must be done from your ext. device.
AUX-IN OPERATION
1. Select "PHONO" mode by pressing repeatedly the [FUNCTION] button (4);
2.
Use one male to male 3.5mm jack cable (not included) to connect any external
audio device to the
Note: Music control (play, pause, etc) must be done from your external device.
DIRECT USB ENCODING
Remark:
Recording speed is 1:1.
•
No song title will be recorded during encoding mode.
•
To avoid damage to USB memory, remove it only when the radio is turned off.
•
ENCODE FROM DAB RADIO, PHONO, CASSETTE, BLUETOOTH AND AUX-IN:
1. Plug the USB stick into the [USB PORT] (1);
2. Perform normal playback of the source you want to encode & record;
3. Press the [RECORD] button (5) twice to start encoding. On the display will flash
"USB";
4. Once the record is finished, press the [STOP] button (14) to stop recording.
ENCODE FROM CD:
1. Plug the USB stick into the [USB PORT] (1);
2. Perform normal playback of the CD you want to encode & record;
3. After focus search is completed, press the [RECORD] button (5);
4. Press repeatedly the [SKIP -/+] button (15/16) during the playback to select the
desired encoding option:
•
REC-1: Select to record only the current track;
REC-F: Select to record the whole folder;
•
[AUX-IN SOCKET]
English
(25);
6