Change Of Door Opening Direction Of Frozen Food Compartment; Electrical Connection - Electrolux ERC 2450 Mode D'emploi

GB
Change of door opening direction of
frozen food compartment
After changing the outer door opening direction at this
type it is necessary to remount the door of the frozen
food compartment as well.
Operations and their order can be seen in figure.
Press the retaining lever inside the lower
doorhinge
Tilt the lower doorhinge out together with the
freezer compartment door then remove it from
the pin of the freezer compartment door.
Remove the rectangular plug and put it into the
opening got free on the other side.
Having the freezer compartment door turned by
180° put the lower hinge onto the lower pin of the
freezer compartment door.
Put the upper hinge pin of the freezer
compartment door into the free opening, then
push the lower hinge into its place together with
the freezer compartment door.
In case you do not want to perform the procedures
above, call the nearest brand-mark service.
Technicians will accomplish the refitting expertly for
charge.

Electrical connection

This refrigerator is designed to operate on a
230 V AC ( ~ ) 50 Hz supply.
The plug must be put into a socket with protective
contact. If there is no such, it is recommended to
get an electrician to fit an earthed socket in
compliance with standards near the refrigerator.
This appliance complies with the following
E.E.C. Directives:
73/23 EEC of 19.02.73 (Low Voltage Directive)
and subsequent modifications,
89/336 EEC of
Compatibility Directive)
modifications.
64
03.05.89 (Electromagnetic
and subsequent