Kicker PXA.2 Série Manuel D'utilisation page 3

KICKER KISL (optional)
Cut the looped red power cable located on the PXA harness and install a 15A fuse. Fuse installation should be
within 18" (45cm) of the battery and in-line with the harness' power cable, which is connected to your amplifi er. If
you ever need to remove the amplifi er from the vehicle after it has been installed, the ground wire should be the
last wire disconnected from the amplifi er--just the opposite as when you installed it.
≤24"
(60cm)
bare-metal chassis
ground
remote
turn-on
RCA inputs
(remove to use
hi-level input)
2015 PX Stereo Amplifier Rev D.indd 3 2015 PX Stereo Amplifier Rev D.indd 3
to amplifi er
from source unit high-level speaker outputs
+ -
speaker outputs
Model
PXA200.2
≤18"
(45cm)
external fuse
(15A)
+ -
External Fuse
1 x 15 Ampere
12V
battery
bare-metal chassis ground
3
10/23/2015 2:48:57 PM 10/23/2015 2:48:57 PM