First steps
2.1 Notes on low-radiation operation
This cordless telephone (compliant with the DECT standard) facilitates
low-radiation operation (ECO mode).
During a call, the handset reduces the radio output depending on the
distance from the base station. When no call is being conducted, the
handset reduces the radio output to a minimum. This does not mean
that normal DECT radiation is harmful to health. Rather, low-radiation
operation avoids any unnecessary radiation exposure.
The base does not reduce radio output! Set up the base station in a
location where you do not spend much time, for example in the
hallway. Avoid setting it up in your or your children's bedrooms or the
lounge.
3 First steps
3.1 How to use this User Guide
The following method is used in this User Guide to clarify instructions:
Key to be pressed
3.2 Installing the base station
Install the base station as follows:
1
Connect the mains adapter to the base station first and then to
a socket.
2
Connect one end of the telephone cable to the telephone socket
on the wall and the other to the connector on the back of the
base station.
The telephone and power cables should be connected as
3
shown in figure 3A.
8
All manuals and user guides at all-guides.com
Text ....... „Display".
Text that appears on the telephone display