Tripp-Lite PDUMH15AT Manuel Du Propriétaire page 5

All manuals and user guides at all-guides.com
Installation
continued
Connecting the PDU
3
Connect Equipment to PDU. Do not exceed
the load rating of the PDU. The total electrical
current used by the PDU will be displayed on
the digital meter in amperes. Each outlet
includes a green LED that illuminates when the
outlet is receiving AC power.
Features
continued
3
Primary AC Input Power Cord (Model PDUMH15AT):
The cord is permanently attached to the PDU and has a NEMA
5-15P plug.
Primary AC Input Power Cord (Model PDUMH20AT):
The cord is permanently attached to the PDU and has a NEMA
L5-20P plug.
Secondary AC Input Power Inlet (Model PDUMH15AT): The
IEC-320-C14 inlet connects to the detachable Secondary AC
Input Power Cord.
Secondary AC Input Power Inlet (Model PDUMH20AT): The
IEC-320-C20 inlet connects to the detachable Secondary AC
Input Power Cord.
Secondary AC Input Power Cord (Model PDUMH15AT): The
detachable cord has an IEC-320-C13 connector and a NEMA
5-15P plug.
5
PDUMH15AT
PDUMH20AT