Télécharger Imprimer la page

Nutri Ninja BL580 Guide D'utilisation page 6

Publicité

Les langues disponibles

Les langues disponibles

BEFORE FIRST USE
IMPORTANT: Review all warnings
on pages 4–7 before proceeding.
DID YOU KNOW?
• You can take your drinks on the go
using the spout lids.
• The cups, lids, and blade assembly
are BPA free and dishwasher safe.
NOTE: Handle the Pro Extractor Blades®
Assembly by grasping around the
perimeter of the blade assembly base.
NOTE: All attachments are dishwasher
safe. It is recommended that the cups,
lids, and blade assembly be placed
on the top rack of the dishwasher.
Ensure blade assembly and lid are
removed from the cup before placing
in the dishwasher. Exercise care
when handling blade assembly.
Make
sure Flip & Seal Lid is open during
dishwasher cycle.
Remove all packaging materials
1
from the appliance. Exercise care
when unpacking blade assembly.
The blade assembly is sharp.
Wash cups, lids, and blade assembly
2
in warm, soapy water using a
dishwashing utensil with a handle to
avoid direct contact with the blades.
Exercise care when handling blade
assembly, as the blades are sharp.
Thoroughly rinse and air-dry all parts.
3
10
INSTALLING THE BATTERIES
1
Unscrew the FreshVac™ Pump's
power button cap and remove
the battery cover.
Install 6 AA alkaline batteries
2
(included), ensuring the +/-
symbols on the batteries match
the markings on the battery cover
and battery housing.
3
Replace the battery cover, making
sure it is fully seated and clicked
in place.
4
Screw on the pump's power
button cap.
NOTE: If the battery cover and power
button cap are not properly installed
or tightly in place, the pump will
not function.
LIGHT INDICATORS
White Light:
Green Light:
Vacuum sealing
Vacuum sealing
in progress
complete
If light blinks white and green,
replace batteries or make sure
they're properly installed.
USING THE FRESHVAC AC ADAPTER:
If you prefer to power your FreshVac
Pump using an AC Adapter, you may
purchase one on ninjaaccessories.com
1 Insert the plug of the AC Adapter
into an electrical socket.
2 Insert the barrel connector (small
round end of the AC Adapter power
cord) into the AC Adapter port on
the pump.
3 When the AC Adapter is correctly
attached, you will be able to turn on
the FreshVac Pump.
NOTE: Use only an optional AC
adapter manufactured by SharkNinja.
Other after-market adapters are not
compatible with the FreshVac Pump.
USING THE CONTROL PANEL
AUTO-IQ® PROGRAMS FOR THE SINGLE-SERVE FRESHVAC™ CUP
Intelligent pre-set programs combine unique blending and pausing patterns
that do the work for you. Once a pre-set program is selected, it will start
immediately. Press the selected program again to pause it.
MANUAL SETTINGS:
START | STOP
Press once to start continuous
running; press again to stop.
Timer counts up by seconds,
up to 60 seconds.
PULSE
Runs only while pressed down.
Short presses create short pulses.
Timer counts up by seconds as
long as button is pressed down.
AUTO-IQ PROGRAMS:
AUTO-IQ SMOOTHIE
Make super-smooth, sippable drinks
and shakes from fresh or frozen
fruit, milk, liquids, and ice.
AUTO-IQ EXTRACT
Ideal for tough, leafy, or fibrous
whole fruits and vegetables,
including their skins, seeds,
and stems.
ninjakitchen.com
11

Publicité

loading