Vulcan QUICKFRY VHG-A Serie Manuel D'installation Et D'utilisation page 19

VHG SERIES GAS FRYERS
Micro-Filtration Fabric Envelope Accessory Assembly
SUCTION TUBE
(SAME AS SCREEN ASSEMBLY)
CLOSING CLIP
FABRIC ENVELOPE INSERT
FABRIC ENVELOPE
(DIFFERENT FROM SCREEN ASSEMBLY)
Fig.4
Slide the fabric envelope insert into the envelope and align the center holes. Fold over the
open end of the envelope and place closing clip on – hinge over and firmly press clip all the
way down to secure and seal filter assembly. Make sure that the folded end of the envelope
is face down.
Attach suction tube in same manner as the screen assembly shown on previous page.
Dissassemble the fabric envelope assmebly assembly by reversing steps.
Do not use tools. Hand tighten only.
Remove the fabric envelope assembly from the filter pan and clean daily(or more frequently
as required by your operation). Scrape debris and sludge from envelope surfaces with a
spatula.
Do not wash the fabric envelope.
VULCAN F-47679 Rev. A (3-20)
-19-