La Crosse Technology CA84688 Manuel D'instructions page 12

Change Batteries
TX141Wv2 Sensor:
1. Grab the vented portion of the sensor and turn counter clockwise.
2. Remove old batteries and install fresh "C" batteries.
3. Carefully align and turn vented portion clockwise to tighten.
4. Hold the WIND button on the weather station for 3 seconds to search for the sensor.
TX141Wv2 Sensor
Wind cups
Battery cover
Mounting pole
Add-on TX141TH-BCH Sensor(s):
1. Slide battery cover down and lift off sensor.
2. Remove old batteries and install fresh "AA" batteries.
3. Hold the TEMP button on the weather station for 3 seconds to search for the sensor.
Sensor Search
• Hold the WIND button for 3 seconds to search for the wind sensor.
• Hold the TEMP button for 3 seconds to search for add-on temp/humidity sensors.
• If the signal is lost, the unit will display the last data recorded for 30 minutes. If the signal is still not
received after this time, dashes will be displayed on screen.
• After 60 minutes, the station will begin to search for the missing signal automatically.
• The signal strength indicators will flash while searching and be solid when connected.
CA84688
Mounting Hole
Red LED
Red LED
Flashes during Flashes during
transmission transmission
Mounting
Bracket
Wind Speed Weather Station
Optional Add-on
TX141TH-BCH Sensor
TX button
(Transmission)
Channel
1 2 3
Selector
Page | 12