EN
36
All manuals and user guides at all-guides.com
Replace the Lamp
Note: The lamp specification is shown on the rating label.
Proceed as follows to replace the lamp:
1. Set the temperature regulation knob to „0" to switch off the unit.
2. Unplug the appliance to make sure the appliance is disconnected from main power
supply.
3. Remove the screw of the lamp cover.
4. Pull the lamp cover out.
5. Unscrew the lamp.
6. When inserting the new lamp, proceed in reverse order. Then replace the lamp
cover and screw it in place.
7.
Plug in the appliance and regulate the temperature regulation knob to the desired
position.