2. Prepare for Installation
IMPORTANT! This door is designed to accommodate walls that are less than 3/8" (10 mm) out of plumb.
Verify the area the door will be attached to is within 3/8" (10 mm) of plumb. The door may not function
properly if the wall is more than 3/8" (10 mm) out of plumb.
NOTE: Cover the drain hole or close the drain to avoid losing parts.
Confirm the shower base is level.
Confirm the walls are within 3/8" (10 mm) of plumb.
Mark the wall 3/4" (19 mm) from the front edge of the shower base. Repeat for the other side.
Kohler Co.
All manuals and user guides at all-guides.com
5
3/4"
(19 mm)
1280800-2-B