Publicité
Les langues disponibles
Les langues disponibles
manual synchronisation process, as soon as the hands are in the 12 o'clock posi-
tion. To do this, you press the 'SET+' button. The hands then reset themselves to
the original time.
Whenever manual synchronisation has been performed successfully, the
reception indicator reverts to '0'. If the transmitter call was not successful, the
reception indicator does not change and the hands reset themselves to the
time that was displayed before the transmitter call.
5.7 Setting the time zone
If you travel to a country with a different time zone, you can set the current
local time as the second time shown in the lower section of the LCD display
(see section 5.4), and/or adjust the analogue time display to what the time is
locally.
52
All manuals and user guides at all-guides.com
To do so, press the 'MODE' button
repeatedly until you reach '1st TIME'
mode. The analogue time being
shown is now also shown digitally
in the bottom part of the LCD
display.
You adjust the time zone setting,
and thus also the position of the
hands to the time in that zone, an
hour at a time by pressing the
'SET+' (plus 10 hours) and 'SET–'
(minus 13 hours) buttons. If neces-
sary, the date is also changed auto-
matically during such adjustment.
You can protect this function from
being altered accidentally by pres-
sing the 'RESET' button for more
than 3 seconds. A 'lock symbol' on
the LCD display then indicates that
the function is 'protected'.
To enable yourself to make a new
setting, simply press the 'RESET'
button for over 3 seconds.
53
Publicité
