Publicité
Les langues disponibles
Les langues disponibles
* here are two LEDs on each LAN port. Please refer to the table below for the LAN port LED indications.
ACT/LINK LED
SPEED LED
LAN Port
Activity / Link LED
Status
Description
Of
No Link
Blinking
Data Activity
On
Link
** If you use a 2-channel speaker, please connect the speaker's plug into "Front Speaker Jack". See the table below
for connection details in accordance with the type of speaker you use.
Audio Output
Front Speaker
Channels
(No. 7)
2
4
6
8
To enable Multi-Streaming, you need to connect a front panel audio cable to the front
panel audio header. Ater restarting your computer, you will ind the "Mixer" tool on your
system. Please select "Mixer ToolBox"
click "ok". Choose "2CH", "4CH", "6CH", or "8CH" and then you are allowed to select
"Realtek HDA Primary output" to use the Rear Speaker, Central/Bass, and Front Speaker,
or select "Realtek HDA Audio 2nd output" to use the front panel audio.
*** he eSATA connector supports SATA with cables within 1 meters. he SSATA3_3 connector is
shared with the eSATA port
Speed LED
Status
Of
Orange
Green
Rear Speaker
(No. 5)
V
--
V
V
V
V
V
V
, click "Enable playback multi-streaming", and
Description
10Mbps connection
100Mbps connection
1Gbps connection
Central / Bass
Line In
(No. 4)
(No. 6)
--
--
--
--
V
--
V
V
X99 Extreme6
5
Publicité
