Heath Zenith 7912 Mode D'emploi page 2

2
Figure 4
Figure 5
Figure 6
Helpful Videos – www.hzsupport.com
4. Mount push button. Use either screws or double
sided tape to mount push button.
• Screw Mounting: To mount with screws, remove
back of case by pushing in tab on bottom with a
small screwdriver (see Figure 1). Note: Remove
material in screw holes (if needed) before mounting
with screws. Attach back of case to door jamb or
wall (see Figure 4). Snap front of push button on.
• Tape Mounting: When attaching push button
using double sided tape, make sure the surface
of the door jamb or wall is clean.
Chime Mute
The chime can be muted when desired. Press and
release the mute icon to turn the mute ON and OFF
(see Figure 5). Note: The mute icon will glow green
when the chime is muted.
Note: The chime will flash whether the chime is muted
or unmuted.
Volume Control
The chime has adjustable volume levels. Press and
release the "+" or "–" buttons on the back of the chime
to increase or decrease the chime volume one step at a
time. Press and hold the "+" or "–" button to continuously
adjust the volume (see Figure 6).
Operation
Helpful Answers – 1-800-858-8501