CASUALPLAY Baby 0+ SAFE TECH Mode D'emploi page 26

Removing the upholstery
• Unfasten the safety harness and take the shoulder protector pads off.
• Turn the Baby 0
sides, and the plastic strips.
• Lastly, pass the straps and the buckle through the slots in the upholstery.
• To fit the upholstery back onto the
order.
NOTE: It is very important that the protector pads are fitted back on. They are an
important safety element and must be used always.
Fitting the mosquito net (depending on the model)
• Unfold the hood. Undo the zip, found on the top part of the hood, and take the mosquito
net out.
• Spread it out, fasten the elastic strip and the clips on the sides.
• To put the net away undo the side clips and the elastic strip. Roll it up and store it in
the pocket.
Maintenance
• Clean the plastic parts with mild soap and warm water.
• Wash the upholstery and fabric parts by following the washing instructions indicated on
the different fabric care labels.
24
All manuals and user guides at all-guides.com
round. Then undo the 4 fastening hooks found on the
SAFE TECH
+
Baby 0
follow the same steps in reverse
+ SAFE TECH