Télécharger Imprimer la page

CASUALPLAY Baby 0+ SAFE TECH Mode D'emploi page 24

Masquer les pouces Voir aussi pour Baby 0+ SAFE TECH:

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 27
Installing the Baby 0
WARNING: Do not install the child restraint system on front seats fitted with a
frontal AIRBAG, without disconnecting it first.
Baby 0
The
the back of the car (fig.13).
Position the
of the car.
Put the handle in the installing in the car position and make sure that it clicks into place
when it reaches the position.
Pull, carefully, the seat belt and pass it over the
must go under the handle. Fasten the seat belt, and pass the abdominal part of the belt
through the two corresponding guides (1) (coloured blue) (fig.14).
Pass the diagonal part of the belt behind the
Put the belt in the corresponding guide (coloured blue). Hold the
firmly and pull the diagonal part of the belt to tighten it (fig.16).
Removing the Baby 0
Take the diagonal part of the belt out of the fork (coloured blue).
Unfasten the belt and take it out of the guides of the abdominal part taking care to keep
the belt away from the child.
Before taking the
position. Make sure that the handle clicks locked into place.
Installing the Baby 0
NOTE: The
vehicle using the Base fix
NOTE: Before purchasing the Base fix
0+ SAFE TECH is fitted with the release device found on the backrest.
Set the handle of the
Position the
the base.
Press the
Baby 0
indicators will appear on the front part of the base (fig.17).
Check that it is correctly fastened onto the base by pulling the
upwards.
22
All manuals and user guides at all-guides.com
must always be fitted facing backwards, with the child facing
+
SAFE TECH
Baby 0
+
SAFE TECH
Baby 0
SAFE TECH
+
+
SAFE TECH
Baby 0
+
SAFE TECH
Baby 0
Baby 0
SAFE TECH
+
Baby 0
SAFE TECH
+
SAFE TECH
+
+
SAFE TECH
on the vehicle seat so that the child is facing the back
Baby 0
Baby 0
+
+
SAFE TECH
out of the car, move the handle to the carrying
on the BASE FIX Baby 0
(depending on the model) can be installed in the
, which is sold separately.
+
SAFE TECH
Baby 0
+
SAFE TECH
to the carrying position (fig.5) (C).
facing backwards, place it on the fastening points of
against the base, you will hear it click and two green
. The abdominal
SAFE TECH
+
(fig.15).
SAFE TECH
Baby 0
+
+
SAFE TECH
check that your Baby
Baby 0
+
SAFE TECH
SAFE TECH

Publicité

loading