Phonocar VM 032 Notice De Montage page 34

General Operation
("1234" by default). When music playback, touch
remote control to previous/next track (if the options are available).
BT MENU GENERAL OPERATION
Press the SRC button on the panel or the touch key to enter SOURCE main menu, touch SET to enter the
unit system setting menu, then touch BT to enter BT setting menu.
1. PAIR ON/OFF
Set the automatically pair on or off. If select ON, the unit will pair automatically and
"WAITING FOR PAIRING" will appear on the screen.
2. CONNECT ON/OFF
Set the automatic connection on or off. When CONNECT ON and Paired OK, if the distance is over 10
metres, the connection will exit. The Bluetooth technology will automatically establish a connection
between the unit and the registered mobile phone when the transmission distance is 10 metres or shorter.
When CONNECT OFF and Paired OK, if the distance is over 10 metres, the connection will exit.
The Bluetooth technology will not automatically establish a connection between the unit and the
registered mobile phone when the transmission distance is 10 metres or shorter.
Whether the automatic connections is set ON or OFF, when power is off then on again, the unit Bluetooth
will connect the mobile phone (if the Bluetooth function turning on) which is paired OK last time.
3. ANSWER ON/OFF
Set the automatic answering a call ON/OFF. When ANSWER ON and Paired OK, if there is an incoming
call, in 15 seconds, the unit will answer automatically, and voice will be transferred to the unit too.
When ANSWER OFF and Paired OK, if there is an incoming call, the unit will not answer automatically
until you choose receiving or rejecting.
MUSIC MODE
AD2P
AD2P is short for Advanced Audio Distribution Profile. The mobile phones supporting this function can trans-
mit stereo audio, whereas the ones not supporting this function can transmit mono audio only.
AVRCP
AVRCP is short for Audio/Video Remote Control Profile.
The mobile phones supporting this function can control the playback of a Bluetooth audio player.
In the mode of the music player working, if you want to make a phone call, you can press the number keys
on the mobile phone or on the remote control, then touch
At the same time the music player will stop. The TFT screen will appear "DIALLING", after the call received,
the voice will be transferred to the unit.
When the call end, the TFT screen will appear "MUSIC PLAYING". Some mobile phone may instruct whether
resume to playback.
If there is an incoming phone call, the music player will stop, and the TFT screen will appear "PHONE NUM-
BER ANSWER?". When the call ends, the TFT screen will appear "MUSIC PLAYER". Some mobile phone
may instruct whether resume to playback.
to play/pause, and press
to dial.
34
/ key on the TFT or