Braun Wet & Dry 7 Serie Mode D'emploi page 14

All manuals and user guides at all-guides.com
CLEAN&RENEW STATION
Shaving system
1. Drain of the Cle-
is still wet
an&Renew station is
after cleaning
clogged.
Program
2. Cleaning cartridge
has been
has been used for
completed.
quite a while.
Cleaning does 1. Shaver is not placed
not start when properly in the
pressing the Clean&Renew station.
start button. 2. Cleaning cartridge
contains not enough
cleaning fluid (display
lights red).
3. Appliance is in
stand-by mode.
Increased Drain of the Clean&Re-
consumption of new station
cleaning fluid. is clogged.
14
1. Clean the drain with a wooden
toothpick. Regularly wipe the
tub clean.
2. The ethanol proportion has
decreased while the oil
proportion has increased.
Remove residue with a cloth.
1. Insert shaver into the Clean&Re-
new station (contacts of the
shaver need to align with
contacts in the station).
2. Insert new cleaning cartridge.
3. Press start button again.
– Clean the drain with a wooden
toothpick.
– Regularly wipe the tub clean.