Publicité
Les langues disponibles
Les langues disponibles
work area that can be thrown by the
rotating blades.
•
Do the daily maintenance. Refer to
schedule on page 15 .
•
Make sure that there is sufficient fuel in the fuel
tank.
•
Set the cutting height. Refer to
height on page 13 .
To fill fuel
WARNING:
flammable. Be careful and refuel
outdoors, refer to
10 .
WARNING:
exhaust system become very hot during
operation. Risk of burn injury. Let the
engine and the exhaust system become
cool before you fill fuel in the product.
WARNING:
tank as a support area.
CAUTION:
result in engine damage.
The engine runs on gasoline with a minimum octane
rating of 91 RON (87 AKI), not mixed with oil. We
recommend biodegradable alkylate gasoline.
•
Do a check of the fuel level before each use and
refuel if it is necessary.
•
Do not fill the fuel tank fully. Fill to the bottom of
the fuel tank neck.
To adjust the seat
The position of the seat can be moved forward or
rearward and the suspension of the seat can be
adjusted. The suspension on the left side and right
side of the seat are adjusted independently.
WARNING:
adjustments to the seat when the
product is in operation.
•
To adjust the suspension, do these steps:
12
Maintenance
To set the cutting
Gasoline is very
Fuel safety on page
The engine and the
Do not use the fuel
Incorrect type of fuel can
Do not make
a) Pull the handle on the suspension adjuster to
release the pin.
b) Move the handle in the direction of "-" for
softer suspension.
c) Move the handle in the direction of "+" for
harder suspension.
d) Do the same procedure on the suspension
adjuster on the opposite side.
•
To adjust the position of the seat, push the lever
(B) below the seat to the side and push the seat
forward or rearward.
To engage and disengage the
parking brake
CAUTION:
stationary when you engage the parking
brake.
The product must be
2333 - 001 - 16.11.2023
Publicité
