Suzuki 93700-4882 Serie Instructions D'utilisation page 4

4/6
Installation
This instruction indicates an
assembling process for a right
side case. Assembling process
of a left side case also follows
the instruction.
Assembling the Upper Bracket
1. Remove the frame rear cover
(A).
(Refer to the service manual of
GSX-S1000T.)
The frame rear cover (A) is not
reused.
2. Remove the screws (B).
The screws (B) are not reused.
3. Install the Upper Bracket (Right
Side) 1 as shown.
4. Tighten the Screws 3 in order.
("1""2""3""4")
 Screw 3 : 10 N·m (1.0 kgf-m,
GENUINE SUZUKI ACCESSORIES
NOTE
NOTE
NOTE
7.5 lbf-ft)
(A)
(B)
"3"
"1"
"2"
"4"
(B)